|
Lot 4. ELECTRICAL EQUIPMENT |
||||
|
電氣設備 產品技術參數 |
||||
|
編號 |
名稱 |
規格 |
|
數量 |
|
1 |
Electrical Wiring Training System /RIG ( For basic testing and measurement of electrical parameters) |
AC supply:220-380. DC Output Voltage: Fixed: 200V, 3A |
交流電源：220～380。直流輸出電壓：固定：200伏，3A |
20 |
|
電氣線路訓練系統/RIG（電氣參數的基本測試和測量） |
Variable: 0-200V, 12A / Analogue Voltmeter: 300V |
變量：0-200伏，12A/ 模擬電壓表：300伏 |
||
|
|
Analogue Ammeter: 15A: mounting facility for domestic components. |
模擬安培計：15A：用于家用元件的安裝設備。 |
||
|
2 |
Digital Oscilloscopes電子示波器 |
Voltage measurement, Temperature, Impedance, electric Power, frequency etc. Band width: 200 MHz; Channel: 2; Real Time Smple: 1 Gsa/S; Equivalent sample: 25 Gsa/S; Memory Depth: 40 k; Rise time: 1.7ns; Time base accuracy: 50ppm; Volts/DIV Range: 2mv/ div-5v/div; Input Impendance: 1m |
電壓測量，溫度，阻抗，電力，頻率等。帶寬：200MHz；頻道：2；實時采樣：1Gsa/S；等效采樣：25Gsa/S；存儲深度：40k；上升時間：1.7ns；時基精度：50ppm；電壓/DIV范圍：2mv/div-5v/div；輸入阻抗：1m |
10 |
|
3 |
Insulation Resistance tester絕緣電阻測試儀 |
500-1000V Testing Voltage range- 0.5Kv-10Kv/ working temp (10-40) |
500～1000伏，測試電壓范圍-0.5KV-10KV/工作溫度（10-40） |
10 |
|
4 |
Single phase Electric Motors Capacitor start/ capacitor run單項電容起動電動機/電容運行 |
240, 2.2 KW, 3Hp |
240, 2.2 KW, 3Hp |
10 |
|
5 |
Drill impact cordless無繩沖擊鉆 |
18V/ 2.0 AH battery/ 18V charger. |
18V／2 AH電池/18V充電器 |
20 |
|
6 |
Installation Testers安裝測試儀 |
Range: 500V/50-1000A, ERT- 200?/2000? |
范圍 500V/50-1000A, ERT- 200?/2000? |
10 |
|
7 |
Electrical Drilling Machines電鉆機 |
220 V No- speed 2600rpm/ Power consumption 450W |
220 V 2600rpm/ 功率消耗450W |
20 |
|
8 |
Hole saw Kit鉆孔工具包 |
Bi metal Hole Saw, portable kit, 9 Pc- 64mm |
雙金屬孔鋸，便攜式套件，9 PC -64毫米 |
50 |
|
9 |
Three phase Squirrel Cage Induction motors三相鼠籠式感應電動機 |
380 V, 50 Hz, 7.5Kw |
380 V, 50 Hz, 7.5Kw |
10 |
|
10 |
Three phase wound rotor induction motors繞線轉子三相異步電動機 |
380V, 50Hz, 7.7Kw |
380 V, 50 Hz, 7.5Kw |
10 |
|
11 |
Three phase synchronous motor三相同步發電機 |
308V, 50 Hz, 7.5Kw |
380 V, 50 Hz, 7.5Kw |
5 |
|
12 |
Training Model -AC and DC motor Starter Demonstrator AC (Star Delta and DOL ) starter / DC (Three Point & Four Point) starter with Shunt DC Motor- 220V/ 10Hp/1,500 rpm Separately Excited DC Motor- 220V/ 10Hp/1,500 rpm教學模型：交流和直流電動機起動器演示交流起動器(星形三角洲和DOL)起動器/直流(三點和四點)并聯直流電動機起動器-220V/10Hp/1500rpm獨立勵磁直流電動機-220V/10Hp/1500rpm |
work station with the following parameters: Input AC Mains : 415V ± 10%, 50Hz/ Star Delta Starter : 11KW/15HP, 415V AC (Automatic)/ DOL Starter : 3 Phase, 415V AC / DC Motor Starter: Three Point Starter : 220V DC, 10A , Four Point Starter : 220V DC, 10A |
工作臺具有以下參數：輸入交流電源：415V±10%，50Hz /星形三角形起動器：11kW/15HP，415V交流（自動）/DOL起動器：3相，415V AC/DC電動機起動器：三點起動器：220V直流，10A，四點起動器：220V直流，10A |
15 |
|
13 |
Training Model - Programmable logic Controller教學模型：可編程邏輯控制器 |
Mobile work station with Input Power: 3 phase, 5 wire, Ac 380V/ 50Hz DC 0-10V/ Capacity: 1KVA, Training Purpose of machine: Understand the operation of a PLC, Learn to troubleshoot the PLC, Inputs and Outputs, Learn to understand PLC Ladder logic and Statement Programs, Understand Input/output (I/O) wiring, Be able to operate and troubleshoot PLC operated equipment. |
可移動工作臺具有輸入功率：3相，5線，交流380V/50Hz直流0-10V/ 容率：1KVA，器械培訓目的：了解PLC的操作，學習PLC的故障排除，輸入和輸出，學習PLC梯形邏輯和語句程序，理解輸入/輸出（I/O）接線，能夠操作和排除PLC操作設備 |
15 |
|
14 |
Motor winder equipment kit電機卷繞設備包 |
SMT-DW300 Power Supply: 380v/50/60Hz 0.75kw/ 100-260mm/ stack height/ Stator I.D.: 110-210mm/ Stator O.D.: ≤Φ301mm |
SMT-DW300 電源: 380v/50/60Hz 0.75kw/ 100-260mm/ 堆疊高度/ 定子 I.D.: 110-210mm/ 定子 O.D.: ≤Φ301mm |
10 |
|
15 |
Underground Cable fault locator地下電纜故障定位儀 |
9vV battery/ Output frequency: 447.5 KHz/ operating temp: 10-50 degrees) effective range 3 fet-1000 feet) |
9vv電池輸出頻率：447.5千赫/運作溫度：10～50度，有效范圍3 - 1000英尺 |
10 |
|
16 |
Training Model-Solar PV Installation System教學模型：太陽能光伏安裝系統 |
Mobile workstation with solar photovoltaic components, PC-based interactive, multimedia student curriculum; installation manual, and teacher’s guide. Calculate PV circuit voltage and currents, various loads, mobile workstation is equipped with silkscreened labels for component identification; storage/inventory of clamp meter; digital meter; and storage for consumables, including wire and conduit, directly at the workstation. |
移動工作站配有太陽能光伏組件，基于PC的交互式多媒體學生課程；安裝手冊和教師指南。計算光伏電路電壓和電流，各種負載，移動工作站配備有絲網標簽進行元件識別；存儲/庫存鉗位儀表；數字儀表；存儲消耗品，包括電線和管道，均在工作站。 |
5 |
|
17 |
Digital Multimeters數字多用表 |
Accuracy of measurement/ Big liquid crystal display with a light. |
測量精度/大屏幕液晶顯示。 |
50 |
|
18 |
Training Model -Motor Generator set教學模型：電動發電機 |
380/220V, Speed: 1500Rpm/ 3 phase. |
380/220V, 1500Rpm/ 3 相 |
10 |
|
19 |
Variable Capacitors ( Non Polarised)可變電容器（無極） |
0 - 100µF |
0 - 100µF |
20 |
|
20 |
Synchroscope同步示波儀 |
50/60Hz, 220 V/ standard scale: slow-fast. |
50/60Hz，220 V /標準：慢-快 |
20 |
|
21 |
Training Model- Electric motor and transformer comprehensive experiment Device.教學模型：電動機和變壓器綜合實驗裝置 |
Parameters: DC Motor experiments: (DC generator, DC shunt motor, DC motor starts, DC motor speed regulation characteristics etc.), Single phase transformer experiments :(Single phase transformer variable ratio K, Single phase transformer no-load experiments, Single phase transformer short circuit experiments, single phase transformer load experiment), Three phase transformer experiment (Three phase transformer winding polarity measurement, three phase transformer coupling group measurement) , Asynchronous motor experiment : ( Three phase winding Asynchronous motor stator resistance test, three phase Asynchronous motor no-load experiment, three phase Asynchronous motor short circuit experiment, calculate three phase Asynchronous parameter, mechanical properties of three phase asynchronous motor in various operating conduction). Three-phase, five-wire 380V±10% 50Hz/60Hz, < 1.5KVA AC 380V, Adjustable power safety terminal output/ DC 220V, safety terminal isolation output/ 220V, safety terminal isolation output. |
參數：直流電機實驗：（直流發電機、直流并聯電機、直流電機起動、直流電機調速特性等），單相變壓器實驗：（單相變壓器變比K、單相變壓器空載實驗、單相變壓器短路實驗）實驗，單相變壓器負載實驗，三相變壓器實驗（三相變壓器繞組極性測量，三相變壓器耦合組測量），異步電動機實驗：（三相繞組異步電動機定子電阻測試，三相異步電動機空載試驗、三相異步電動機短路試驗，計算三相異步參數，三相異步電動機在各種運行工況下的力學性能。三相，五線制380V±10%50Hz/60Hz，<1.5KVA交流380V，可調電源安全端子輸出/直流220V，安全端子隔離輸出/220V，安全端子隔離輸出。 |
10 |
|
22 |
Training Model-Power Factor Demonstrator教學模型：功率因數演示器 |
Measurement Parameters: Measurement of power factor at resistive (R) Load, Measurement of resistive and inductive (R-L), Measurement of resistive and capacitive (R-C), Inductive and capacitive (R-L-C), Analysis and Power improvement of power factor of RL network through capacitor, Analysis and improvement of power factor of RC network through inductor, Analysis and improvement of power factor of RCL network through inductor. Alphanumeric 16 x 2 Big Font LCD for better visibility/ / Inbuilt isolated BNC terminals to observe V and I simultaneously/ Equipped with inbuilt R, L and C load required for experiment/ Microcontroller based Measurement unit with high accuracy and resolution. |
測量參數：電阻（R）負載功率因數的測量，電阻和電感（R-L）的測量，電阻和電容（R-C）的測量，電感和電容（R-L-C）的測量，通過電容器對RL網絡功率因數的分析和功率改進，分析和改進通過電感實現RC網絡功率因數的變化，電感實現RCL網絡功率因數的分析與改進。字母數字16×2大字體液晶顯示器，能見度更高//內置隔離BNC端子，可同時觀察V和I/配備內置R、L和C負載，用于高精度、高分辨率的實驗/微控制器測量單元。 |
10 |
太陽能光伏安裝系統,電動機和變壓器綜合實驗裝置
瀏覽： 發布日期：2019-03-15
